New and Improved! The BT200 Beacon Tester follows in the footsteps of the BT100 – the most popular Beacon Tester in the world! The BT200 Beacon Tester has improved measurement accuracies, is inherently rugged, and is intuitive to use. Measurements include AIS-EPIRB and AIS Transceivers. Now completely integrated, this tester packs a whole lot of measurement capability into a very small package.
 

The BT200 Beacon Tester is The Standard in emergency beacon device testing and now offers the ability to test AIS systems – all with one device!

Building on the features of the industry standard BT100, the BT200 Beacon Tester offers new and improved decode and measurement capabilities for all known Cospas-Sarsat approved emergency beacons, new AIS-EPIRBs, as well as AIS Transceivers (Class A & B).

Don’t risk incomplete testing – use the BT200 Beacon Tester to test your equipment thoroughly.

• measures all 406, 121.5, 243, and AIS-EPIRB parameters
• measures AIS Transceivers (Class A & B)
• Receiver is fully integrated into an IP68 rated device – rugged and waterproof!
• Capable of complete 406, 121.5, 243 MHz channel measurements
• Receives all Cospas-Sarsat past, current, and future frequency channels
• Includes an Oscillograph – monitor signals in real-time!
• Capable of decoding all Cospas-Sarsat protocols, including RLS and ELT(DT)
• Includes an internal temperature sensor for measurement accuracy
• Direct connection power measurement accuracy to ± 0.25dB on 406 MHz!
• External coax allows direct connection between Beacon and tester (no external attenuator required)
• Internal antenna measures beacon transmission over the air.
• Very intuitive and easy to use software – familiar Android based operating system
• User can add text, audio, photos, and videos to each measurement
• Creates custom PDF Beacon Test Report
• Creates custom IMO Test Report
• Easily transfer delimited measurement data to PC for storage or analysis
• Also can measure 121 or 121/243-only beacons (C91a ELTs)
• Exceeds all IMO, FAA, IC, and EuroCAE EPIRB, ELT and AIS inspection requirements
• Identifies beacon manufacturer and model number from Cospas-Sarsat approval list
• Free software and firmware updates
• 

• Fully integrated, rugged BT200 Beacon Tester
• RF Input Interface Cable
• Booster antenna
• OTG/USB cable
• USB cable
• AC mains charger
• Operator’s Manual
• Watertight Storage Box
•